215333
195
Revision A
1024927
A
B
C
D
E
Figure 4.138: Driveline Shield
12. Apply a bead of medium-strength threadlocker
(Loctite
®
243 or equivalent) around the threads of M10 hex
flange head bolt (B). Install bolt (B) through cover plate (A)
and top plate (C). Torque hardware to 61 Nm (45 lbf·ft).
13. Apply a bead of medium-strength threadlocker
(Loctite
®
243 or equivalent) around the threads of M10 hex
flange head bolt (D). Install bolt (D) through cover plate (A)
and vertical shield (E). Torque hardware to 61 Nm
(45 lbf·ft).
14. Tighten bolts (B) and (D).
1024929
A
B
A
A
A
Figure 4.139: Driveline Shield
15. Position vertical driveshield (B) as shown at right. Apply a
bead of medium-strength threadlocker (Loctite
®
243 or
equivalent) around the threads of four M10 hex flange
head bolts (A). Use bolts (A) to secure vertical driveshield
in place. Torque hardware to 61 Nm (45 lbf·ft).
WARNING
Ensure the cutterbar is completely clear of foreign objects.
Foreign objects can be ejected with considerable force when
the machine is started and may result in serious injury or
machine damage.
