215333
143
Revision A
Installing Cutterbar Inboard Curtain
1003631
Figure 4.27: Cutterbar Doors
—
R1 Series Rotary Disc
Pull-Type
1.
Open cutterbar doors. For instructions, refer to
.
1011313
B
A
Figure 4.28: Inboard Curtain and Brackets
2.
Install curtain onto weld and bolt studs on center shield,
install two curtain brackets (B), and secure with four
nuts (A).
3.
Torque hardware to 28 Nm (21 lbf·ft).
IMPORTANT:
To avoid damaging bolt studs, do
NOT
overtighten the nuts.
1011318
A
B
Figure 4.29: Inboard Curtain Attached to Rotary Disc
Pull-Type
4.
Secure two curtain brackets (A) to center shield using two
M10 carriage head bolts (B) and nuts.
5.
Torque bolts (B) to 39 Nm (29 lbf·ft).
