215333
277
Revision A
4.8
Conditioner System
4.8.1
Roll Conditioner
Rolls condition the crop by crimping and crushing the stem in several places, allowing the release of moisture resulting in
faster drying times. Both steel and polyurethane conditioner rolls are available. Refer to Chapter
for ordering information.
Inspecting Roll Conditioner
DANGER
To avoid bodily injury or death from unexpected start-up or fall of a raised machine, stop engine, remove key, and
engage lift cylinder lock-out valves before going under machine for any reason.
WARNING
Exercise caution when working around the blades. Blades are sharp and can cause serious injury. Wear gloves when
handling blades.
1.
Lower the rotary disc pull-type fully.
2.
Shut down the engine, and remove the key from the ignition.
3.
Engage the lift cylinder lock-out valves. For instructions, refer to
.
1010960
A
A
Figure 4.318: Driveshields
4.
Remove left and right driveshields (A). For instructions,
refer to
Removing Driveshields, page 219
.
1011083
A
Figure 4.319: Conditioner Roll Left Bearing
5.
Inspect conditioner roll left bearing (A) for signs of wear or
damage. If the bearing needs replacing, contact your
Dealer.