215333
233
Revision A
1019457
A
Figure 4.225: Driveline Guard
IMPORTANT:
If installing a replacement guard, ensure chain (A) is short
enough that it does
NOT
wrap around the driveline guard.
1015139
A
B
B
C
C
Figure 4.226: Long and Short Bolts
4.
Slide lock collar (A) on shaft.
5.
Position shaft end of the driveline onto the hitch support
bracket, and support the driveline to hold it in place.
IMPORTANT:
Ensure locking collar (A) is on the backside of the support
bracket.
6.
Install two long bolts (B) and three short bolts (C) exactly
as shown.
1008550
A
B
Figure 4.227: Flange Installed at Center Support
7.
Install flange (A).
8.
Ensure distance (B) between the tip of the shaft and the
front face of the center support is 136 mm to 144 mm
(5 3/8 in. to 5 11/16 in.).
