215333
132
Revision A
NOTE:
It may be necessary to remove and replace the driveline shield cones during the greasing procedure. Refer to
Driveline Shield Cone, page 223
for more information.
NOTE:
Use high temperature extreme pressure (EP2) performance with 10% max molybdenum disulphide (NLGI Grade 2) lithium
base unless otherwise specified.
10106531010653
A
B
Figure 4.9: Driveline Grease Location
(Every 25 Hours)
A - Primary Driveline Slip-Joint
B - Driveline Slip-Joint
IMPORTANT:
Apply grease to driveline slip-joint grease fittings.
