215333
74
Revision A
1016412
Figure 3.80: Rotary Disc Pull-Type Rotation
4.
Operate the hitch swing control lever to rotate the rotary
disc pull-type to the right until the cam bearing nut is
aligned with the green section of the transport alignment
gauge decal.
1016413
Figure 3.81: Transport Switch
5.
Move the transport switch to the upper position and
ensure that the light is
NOT
illuminated. The hitch swing
circuit is now deactivated and the transport circuit is active.
1016414
A
B
C
Figure 3.82: Transport Assembly Rotation
6.
Operate the hitch swing control lever to lower transport
wheels (A) and hold the lever until the rotary disc pull-type
is lifted off the ground.
7.
Continue to hold the hitch swing control lever so that
rotary disc pull-type (B) rotates to the left and under
the hitch.
8.
Release the hitch swing control lever when rotary disc pull-
type (C) stops rotating.