215333
156
Revision A
1011305
B
A
C
D
Figure 4.51: Cutterbar Disc and Cap
2.
Place a pin (or equivalent) in the front hole of the rock
guard (D) to prevent disc rotation while tightening bolts.
3.
Position new disc (A) on spindle ensuring that it is
positioned at a 90° angle in relation to the adjacent discs.
4.
Install cutter disc cap (B), and secure assembly with four
M12 bolts and washers (C). Torque bolts to 85 Nm
(63 lbf·ft).
WARNING
Ensure the cutterbar is completely clear of foreign objects. Foreign objects can be ejected with considerable force when
the machine is started and may result in serious injury or machine damage.
5.
Remove pin (or equivalent) from front hole of rock guard.
1010658
Figure 4.52: Cutterbar Doors
—
R1 Series Rotary Disc
Pull-Type
6.
Close cutterbar doors. For instructions, refer to
