215333
285
Revision A
1010977
A
B
Figure 4.339: Carrier Removed from Header
29. Start the tractor, and slowly maneuver carrier (A), away
from header (B).
Removing the Conditioner
CAUTION
Ensure spreader bar is secured to the forks so that it cannot slide off the forks or towards the mast while detaching the
conditioner from the rotary disc pull-type.
1011047
A
B
B
Figure 4.340: Spreader Bar
1.
Attach spreader bar (A) to a forklift or equivalent lifting
device, and attach chains to lugs (B) on the conditioner. Use
a chain rated for overhead lifting with a minimum working
load of 1135 kg (2500 lb.).
DANGER
To prevent the conditioner from falling backward, ensure lifting
chains are secure and tight. Failure to do so may result in death
or serious injury.
1024911
A
B
Figure 4.341: Conditioner Drive
2.
On the left side of the rotary disc pull-type, remove the
conditioner drive belt as follows:
a.
Back off the jam nut and tensioner nut (B) on the belt
idler until belts (A) are loose and can be removed.
b.
Remove the four belts.
