215333
282
Revision A
1030285
A
B
Figure 4.330: Adjuster Bolt
6.
Turn out adjuster bolt (A) on each float spring until 400 mm
(17 3/4 in.) of thread (B) is exposed. Repeat on
opposite side.
1030466
A
B
Figure 4.331: Right Float Adjuster
7.
Open lift cylinder lock-out valves (A) (so the handle is in line
with the hose). Repeat on opposite side.
8.
Start the engine.
9.
Lower the rotary disc pull-type fully.
10. Shut down the engine, and remove the key from
the ignition.
11. Check that float adjuster bolts (B) are loose. Back off
adjuster bolts as required. Repeat on the opposite side.
12. On the
LEFT
of the rotary disc pull-type, remove float
adjuster bolt (B) from spring. Do
NOT
allow spring to drop
when bolt is removed.
1010960
A
A
Figure 4.332: Driveshields
13. Open left and right driveshields (A). For instructions, refer
to
3.2.1 Opening Driveshields, page 33
.
