215333
50
Revision A
If your tractor has a three-pin auxiliary power connection (A):
10236931023693
A
B
C
Figure 3.38: Three-Pin Auxiliary Connector
5.
Connect the two wires (B) from the three-pin auxiliary
connector to power wires (C) on the control box, wrap
connections with electrical tape, and skip to Step
.
If your tractor does not have a three-pin auxiliary power connection:
1023703
A
B
C
Figure 3.39: Control Box
6.
Connect control box power wire (A) to the tractor
’
s power
supply as follows:
•
Connect wire (C) with the red tag to tractor power.
•
Connect wire (B) with no tag to tractor ground.
NOTE:
If the red tag is missing, look for the wire with the number
one printed on it; this is the power wire. The ground wire
has a number two printed on it.
NOTE:
If the red light does not illuminate when the switch is in
field mode, check for correct polarity of power and ground
wire connection. The control box includes reverse polarity
protection.
