215333
193
Revision A
1027275
A
B
Figure 4.132: Drum Disc
3.
Position the drum disc assembly (B) as shown.
4.
Use an 18 mm deep socket to install four M12 bolts (A) and
washers that hold the drum disc in place. Torque hardware
to 85 Nm (63 lbf·ft).
1024920
A
B
C
D
Figure 4.133: Driveline
5.
Lubricate spindle splines (A). For specifications, refer to the
inside back cover of this manual.
NOTE:
For clarity, the illustration shows a cutaway view of the
drum and tube shield.
6.
Insert driveline (B) at an angle and guide it past hub
drive (C) and drum (D).
7.
Insert splined spindle end (A) into the splined bore of
driveline (B).
1011137
A
A
B
C
Figure 4.134: Driveline
8.
Place a bead of medium-strength threadlocker
(Loctite
®
243 or equivalent) around the threads of four
M12 hex flange head bolts (A). Use the bolts and spacers to
secure driveline assembly (B) to hub drive (C). Torque bolts
to 102 Nm (75 lbf·ft).
