MacDon R1 Series, Operator'S Manual

Page: 261 / 346

215333
245
Revision A
4.5.7 Cross Driveline
1011433
A
Figure 4.255: Cross Driveline
Cross driveline (A) transfers power from the tractor
’
s power
take-off (PTO) to the cutterbar-conditioner drive gearbox
(T-gearbox). Follow the regular lubrication schedule for this
component. For instructions, refer to
4.3.5 Lubricating the
Rotary Disc Pull-Type, page 128 .
Removing Cross Driveline
WARNING
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove the key
from the ignition before leaving the operator
’
s seat for any reason.
1015179
1015179
A
Figure 4.256: Lower Left View of Rotary Disc Pull-Type
1. Shut down the engine, and remove the key from the
ignition.
2. Open the cutterbar doors to access cross driveline (A) from
inside the rotary disc pull-type. For instructions, refer to
3.3.1 Opening Cutterbar Doors
–
North America, page 36 or
3.3.2 Opening Cutterbar Doors
–
Export Latches, page 37 .
1015165
A
B
Figure 4.257: Cross Driveline Shield
3. Loosen clamp (A) and slide driveline shield (B) away from
the yoke.
4. Repeat for the opposite end of the driveline.
MAINTENANCE AND SERVICING