215333
292
Revision A
1010974
A
B
C
A
B
D
E
Figure 4.360: Aft Driveline and Steering Arm
11. Undo strapping or wire supporting driveline to hitch (D),
and connect driveline (E) to the header swivel gearbox. For
instructions, refer to
Installing Clutch Driveline, page 239
12. Remove hex head bolts (A) and spacers (B) from the
gearbox.
13. Undo strapping or wire supporting the steering arm to the
hitch, and position steering arm (C) on the gearbox.
14. Secure the steering arm to the gearbox with spacers (B) and
hex head bolts (A). Apply high-strength threadlocker
(Loctite
®
262 or equivalent) to the front holes and torque
bolts to 203 Nm (150 lbf
∙
ft).
1030468
A
B
C
Figure 4.361: Mechanical Center-Link
15.
If equipped with mechanical center-link:
Undo the
strapping or wire securing center-link (B) to the
carrier frame.
16.
If equipped with mechanical center-link:
Remove the pins
and hardware from anchor (C).
17.
If equipped with mechanical center-link:
Attach
center-link (B) to anchor (C) with clevis pin (A) and secure
with a cotter pin.
1018206
A
B
C
D
Figure 4.362: Hydraulic Center-Link and
Indicator Links
18.
If equipped with hydraulic center-link:
Undo the strapping
or wire securing center-link (B) and indicator (D) to the
carrier frame.
19.
If equipped with hydraulic center-link:
Remove the pins
and hardware from anchor (C).
20.
If equipped with hydraulic center-link:
Attach
center-link (B) and indicator (D) to anchor (C) with clevis
pin (A) and secure with a cotter pin.
