215333
111
Revision A
3.17.3
Forming Shields
–
Finger Conditioner
The position of the forming shields controls the width and placement of the windrow. Decide which forming shield position
to use based on the following factors:
•
Weather conditions (rain, sun, humidity, wind)
•
Type and yield of crop
•
Available drying time
•
Method of processing (bales, silage, green-feed)
A wider windrow will generally dry faster and more evenly, resulting in less protein loss. Fast drying is especially important
in areas where the weather allows only a few days to cut and bale. For more information, refer to
A narrower windrow may be preferable for ease of pick-up and when drying is not critical (for example, when cutting for
silage or green-feed).
Positioning Side Deflectors
–
Finger Conditioner
The position of the side deflectors controls the width and placement of the windrow. To ensure windrow placement is
centered between the carrier wheels, adjust both side deflectors to the same position.
WARNING
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove the key
from the ignition before leaving the operator
’
s seat for any reason.
1015085
A
B
Figure 3.140: Right Top Cover
1.
Loosen handle (A) on the top cover.
2.
Move side deflector (B) to the desired position.
3.
Tighten the handle.
4.
Repeat for the other side.
