Assembling mAntel
WARning: Use only 1/2" screws to attach metal
angle brackets. Damage to mantel will result if other
screws are used for this purpose.
imPORtAnt: more than one person is required to lift
assembled mantel. lift mantel by leg assemblies. lifting
by header or mantel top could damage mantel.
When assembling mantel do not tighten screws completely
until told to do so. There should be some play in the pieces
to allow for proper alignment and best possible fit. It is very
important that more than one person assemble mantel. Panels
must be held in proper alignment to each other while tighten-
ing screws to assure fewer gaps and proper surface align-
ment. When tightening screws, do not over tighten. This may
cause threads to strip. The supplied Allen wrench should be
used rather than a power screwdriver. Panels have threaded
inserts installed at screw locations. Screws should start and
turn easily in threaded holes when assembled according to
instructions. Do not force screws into holes.
IMPORTANT
: A serial number label is located inside of right
side panel and on outside package. When calling to request
technical assistance or for replacement parts please have
serial number ready.
W23FT ManTel and Base
asseMBlY and InsTallaTIOn InsTRUCTIOns
Important:
Read entire instruction sheet before
assembling or installing mantel kit.
this mantel is only approved for use with DesA
Heating Products 21" and 23" fireplace systems*.
Do not use mantel with any other product.
*CGEF21, CGEF23, VEF21, VEF23, CGMFN, CGMFP,
VGMRN, VGMRP SERIES.
This mantel kit contains the following:
• Mantel pieces - unassembled and marked as follows:
#1 Base
#2 Right Side with arrow
#3 Right Front Leg with arrow
#4 Left Side with arrow
#5 Left Front Leg with arrow
#6 Header with arrow
#7 Top
• Hardware Kit*
10 - Metal Brackets
118937-01
20 - Screws M6 x 12 mm (1/2")
121149-01
8 - Screws M6 x 30 mm (1
1
/
4
")
121335-01
8 - Washers M6
121336-01
1 - Allen Wrench
121337-01
* Extra hardware may be included.
If any wood pieces are missing or damaged, contact the
dealer where you purchased this mantel for replacement.
If hardware or trim is missing or damaged, contact DESA
Heating Products at 1-866-672-6040 for referral. You can
also visit DESA Heating Products' technical service web site
at
www.desatech.com
.
Note: Gather all mantel pieces together before assembling.
www.desatech.com
