215333
234
Revision A
1008505
A
B
C
D
A
A
Figure 4.228: Flange, Bearing, and Grease Fitting
9.
Install ball bearing (C).
10. Tighten the locking collar in the direction of the shaft
rotation.
11. Install flange (B) with grease fitting (D), and five nuts (A).
IMPORTANT:
Grease fitting (D) must be positioned 90 degrees from long
bolts as shown.
1008497
A
B
Figure 4.229: Spacer Installed at Center Support
12. Install spacer (A) with cutout in spacer aligned with grease
fitting (B).
1008506
A
B
C
Figure 4.230: Metal Plate Attached to Center Support
13. Position metal plate (B) on center support.
14. Apply medium-strength threadlocker (Loctite
®
243 or
equivalent) to two nuts (A), and then use them to secure
metal plate (B) while ensuring loop on metal plate (C) is
positioned on lower side as shown.
15. Torque nuts (A) to 20 Nm (15 lbf·ft).
