This manual is intended for the users of the FM1400 ceiling mounting bracket.
It includes the instructions for mounting the FM1400 ceiling mounting bracket
to the ceiling.
•
This bracket is intended to be used with some models of dome
cameras. Ask your retailer for details on a specific model and do
not use it with other models of cameras.
•
This installation should be performed by a qualified service
personnel in conformance to all local codes.
•
You may need to reinforce the ceiling. If the ceiling is not strong
enough to support the camera, the camera may fall.
•
Do not use this product for other purposes.
Mounting
1
Assemble the camera body to the bracket by
tightening the screws.
•
DC-D2233WHX / DC-D3233WRX / DC-
D3233RX / DC-D3233X Models:
Screw No. 5 (3-point), PCB Support 8.8mm
•
DC-D2233R / DC-D2233 Models:
Screw No. 4 (2-point), PCB Support 20.4mm
•
DC-D2233WHR / DC-D2233WR / DC-
D2233W Models:
Screw No. 3 (3-point), PCB Support 23.1mm
•
DC-D4233WRX / DC-D4233HRX / DC-
D4223WRX Models: Screw No. 5 (3-point),
PCB Support 20.4mm
•
DC-D4233RX / DC-D4223RX Models:
Screw No. 4 (2-point) 4ea, PCB Support
8.8mm
•
Other Plastic Dome Models: Screw No. 2
(3-point), No PCB support necessary
•
Other Vandal Dome Models: Screw No. 1
(3-point), No PCB support necessary
< Screw No. >
(DC-D2233R Model)
1
2
3
4
5
1
2
3
5
4
2
3
1
5
*When using the screws of DC-D4233RX / DC-D4223RX
models, combine the two as shown below.
2
Connect the cable through the cable hole
and screw the safety wire to the bracket to
prevent the bracket from falling on to the
floor.
Cable
Safety Wire
FM1400 INSTALLATION MANUAL
