215333
204
Revision A
1024792
A
Figure 4.158: Driven Drum
10. Inside the drum, use a 305 mm (12 in.) extension and
18 mm socket to remove four M12 bolts (A) and washers
holding the drum disc in place.
11. Remove the drum disc assembly.
Installing Large Driven Drums and Driveline
–
R113 or R116 PT
DANGER
To avoid bodily injury or death from unexpected start-up or fall of a raised machine, stop engine, remove key, and
engage lift cylinder lock-out valves before going under machine for any reason.
WARNING
Exercise caution when working around the blades. Blades are sharp and can cause serious injury. Wear gloves when
handling blades.
NOTE:
Illustrations show left the drum and driveline.
1.
Shut down the engine, and remove the key from the
ignition.
1017492
A
Figure 4.159: Spacer Plate
2.
Ensure spacer plate (A) is on the spindle.
