215794
41
Revision A
4.3
Checking and Adding Wheel Drive Lubricant
Ensure that the wheel drive lubricant level is correct to maximize the service life of the components.
DANGER
To prevent bodily injury or death from the unexpected startup of the machine, always stop the engine and remove the
key from the ignition before leaving the operator
’
s seat for any reason.
CAUTION
Park on a level surface with the ground speed lever (GSL) in the N-DETENT position and the steering wheel in the
locked (centered) position. Wait for the cab display module (CDM) to beep and display an
“
In Park
”
message to confirm
that the parking brake is engaged.
1.
Park the windrower on level ground.
1007544
A
B
C
Figure 4.4: Drive Wheel Hub
2.
Rotate the wheel drive so that the imaginary line running
through plugs (A) and (B) and hub center (C) is parallel with
the ground, as shown.
3.
Shut down the engine, and remove the key from
the ignition.
4.
Remove plug (A). The lubricant should be visible through
the port.
5.
If lubricant needs to be added, remove plug (B), and add
lubricant until lubricant runs out from port (A) or (B). For
lubricant specifications, refer to
6.
Reinstall the plugs and tighten them.