215794
53
Revision A
1018098
A
Figure 4.22: DEF Tank
IMPORTANT:
Before filling the DEF tank, perform the following steps.
These instructions can also be found on decal (A), which is
located on the DEF tank
’
s cover.
•
Before storing the machine for longer than six months,
drain the DEF tank.
•
Before storing the machine in ambient temperatures
below 0°C (32°F), ensure that the level of fluid in the
DEF tank is 75 % of the tank
’
s capacity or lower.
Take the following precautions when handling DEF:
•
Use a clean funnel. Avoid using funnels and containers that have been used with other fuels or lubricants.
•
Use only distilled water to rinse the components that store or deliver DEF; tap water can contaminate DEF.
•
If distilled water is not available, use clean tap water, then rinse the affected components with DEF.
1007400
A
Figure 4.23: DEF Tank
7.
Clean around filler cap (A).
8.
Turn cap (A) counterclockwise until it is loose.
Remove the cap.
9.
Fill the tank with an approved DEF. Refer to the windrower
operator
’
s manual for specifications.
10. Replace filler cap (A) and turn it clockwise until it is tight.
11. Close the maintenance platform.
1000412
A
B
Figure 4.24: Platform Latch
12. To close the right platform, push latch (A) to unlock it, and
grasp handle (B) and push forward until it stops and
latch (A) is engaged.
NOTE:
Ensure that the platform is latched properly before
standing on it.
