215794
24
Revision A
1026483
A
B
C
Figure 3.10: Caster Wheel Supported by Sling
CAUTION
Ensure all bystanders are clear of the area when lifting, as the
caster wheel may swing.
5.
Attach sling (A) to caster wheel assembly (B) and use a
suitable lifting device to move the caster wheel into
position next to walking beam (C).
6.
Tilt the walking beam and maneuver the caster assembly to
insert the spindle into the walking beam.
1026485
A
B
C
D
Figure 3.11: Caster Wheel
7.
Install flat washer (A) onto the spindle.
8.
Install key (B) and arm (C) onto the spindle.
NOTE:
Ensure there is no clearance at the top and bottom of the
walking beam extension.
9.
Install retaining ring (D).
10. Torque anti-shimmy shock arm nut (C) to 170 Nm
(125 lbf·ft).
11. Repeat the caster wheel installation procedure for the
opposite side.
12. Remove the stand and lifting device from the rear of the
windrower.
