215794
109
Revision A
1011808
CXXX
EXXX
FORCE HEADER TYPE?
NO/YES
A
B
Figure 5.113: Header Type
5.
Press SELECT (B) until FORCE HEADER TYPE? appears on the
upper line.
•
NO/YES will appear on the lower line.
6.
Press right arrow (A) to select YES. Press SELECT (B).
•
SELECT HEADER TYPE will appear on the upper line.
•
DISK HEADER will appear on the lower line.
1011810
CXXX
EXXX
SELECT HEADER TYPE
DISK HEADER
A
B
C
Figure 5.114: Header Type
7.
Press left arrow (A) or right arrow (B) to cycle through the
list of header types.
8.
When the desired header type appears, press SELECT (C).
•
EXIT FORCE HEADER? will appear on the upper line.
•
NO/YES will appear on the lower line.
9.
Press right arrow (B) to select YES. Press SELECT (C).
Proceed to the next diagnostic option, or press PROGRAM
to exit programming mode.