MacDon M155E4, Assembly Instruction Manual

Page: 227 / 230

215794
217
Revision A
Predelivery Checklist
Perform these checks and adjustments prior to delivery to your Customer. Complete this checklist and provide it to the
Dealer or the Operator.
CAUTION
Carefully follow the instructions given. Be alert for safety related messages that bring your attention to hazards and
unsafe practices.
Windrower Serial Number: Engine Serial Number:
Table .18 M155 E4 Self-Propelled Windrower Predelivery Checklist
ü ü
Item Reference
Check for shipping damage or missing parts. Be sure all
shipping dunnage is removed.
—
Check for loose hardware. Tighten to required torque. 9 Reference, page 199
Check tire air pressures and adjust as required. 4.2.1 Checking Tire Pressure, page 39
Check wheel drive hub lubricant level.
4.3 Checking and Adding Wheel Drive Lubricant,
page 41
Check engine coolant level and strength at the pressurized
coolant tank.
4.10 Checking Engine Coolant, page 49
Drain Diesel Exhaust Fluid (DEF) tank and refill with fresh DEF. 4.13 Replacing Diesel Exhaust Fluid, page 52
Check air cleaner and clamps. 4.5 Checking Engine Air Intake, page 43
Check hydraulic oil level and check for leaks along lines. 4.6 Checking Hydraulic Oil Level, page 45
Check fuel separator for water and foreign material, drain
and clean as necessary, and add fuel.
4.7 Checking Fuel Separator, page 46
Check gearbox lubricant level. 4.9 Checking Gearbox Lubricant Level, page 48
Check tension of A/C compressor belt.
4.11 Checking Air Conditioning Compressor Belt,
page 50
Check that machine is completely lubricated. 3.7 Lubrication, page 29
Check neutral interlock system. 6.1 Checking Safety System, page 127
Check horn operation. 6.8 Checking Horn, page 140
Start engine and run to operating temperature. 6.3 Checking Windrower Startup, page 132
Check CDM and fuel and diesel exhaust fluid (DEF) gauges for
operation. 6.5 Checking Gauges and Cab Display Module
Display, page 134
Check Operator
’
s presence system. 6.2 Checking Operator Presence System, page 130
Check alternator charge rate at instrument console. 6.6 Checking Electrical System, page 135
Check that air conditioning is functioning properly.
6.10 Checking Air Conditioning and Heater, page
142
Check that heater is functioning properly.
6.10 Checking Air Conditioning and Heater, page
142
Check that interior lights are functioning properly. 6.9 Checking Interior Lights, page 141
Check maximum (no load) engine speed at CDM. 6.4 Checking Engine Speed, page 133
Check that exterior lights are functioning properly. 6.7 Checking Exterior Lights, page 136
Check that hazard and signal lights are functioning properly. 6.7 Checking Exterior Lights, page 136
Check that beacons are functioning properly (if installed). 6.7 Checking Exterior Lights, page 136