215794
103
Revision A
1030064
SWATH SENSOR CAL
PRESS SWATH DOWN
C###
E###
Figure 5.99: Swath Compressor Sensor Calibration
•
SWATH SENSOR CAL will appear on the upper line.
•
PRESS SWATH DOWN will appear on the lower line.
1022623
A
B
Figure 5.100: Swath Compressor Controls
A - Lower Swath Compressor
B - Raise Swath Compressor
7.
Press and hold button (A) to lower the swath compressor.
•
CALIBRATING SWATH will appear on the upper line.
•
The messages FORM DOWN and HOLD (this message
will flash) will appear on the lower line.
•
SWATH FORM COMPLETE will appear for two seconds
on the lower line (accompanied by a buzzer tone) when
the calibration procedure is complete.
8.
Press PROGRAM to exit programming mode.
