215794
120
Revision A
5.9.7
Testing Rotary Disc Drive Circuit Activate Function Using Cab Display Module
The cab display module (CDM) can be used to test the rotary drive circuit, rather than using the controls on the operator
’
s
station.
IMPORTANT:
Do
NOT
overspeed the rotary drive. Overspeeding can lead to vibration, belt failures, or other overspeeding-related
problems.
NOTE:
•
A rotary disc header must be attached to windrower to follow this procedure.
•
The engine must be running to perform this procedure.
DANGER
Ensure that all bystanders have cleared the area.
1022036
CXXX
EXXX
WINDROWER SETUP?
NO/YES
A
B
Figure 5.139: CDM Programming Buttons
1.
Start the engine.
2.
Press PROGRAM (A) and SELECT (B) simultaneously on the
CDM to enter programming mode.
•
WINDROWER SETUP? will appear on the upper line.
1011785
CXXX
EXXX
DIAGNOSTIC MODE?
NO/YES
A
B
Figure 5.140: Diagnostic Functions
3.
Press SELECT (B) until DIAGNOSTIC MODE? appears on the
upper line.
•
NO/YES will appear on the lower line.
4.
Press right arrow (A) to select YES. Press SELECT (B).