215794
147
Revision A
Chapter 8:
Attaching Headers to M Series Windrower
Follow these procedures to safely attach these MacDon headers to the windrower.
8.1
Attaching Header Boots
Header boots are required to attach a D Series or D1 Series Draper Header to the windrower. Attach header boots to the
windrower
’
s lift linkage if they are not already installed. Header boots are supplied with the header.
1029714
A
B
Figure 8.1: Header Float Linkage
IMPORTANT:
To prevent damage to the lift system when lowering the header
lift linkages without a header or a weight box attached to the
windrower, ensure that the float engagement pin is installed in
storage position (B) and
NOT
in engaged position (A).
1000752
A
B
Figure 8.2: Header Boot
1.
Remove pin (B) from boot (A).
