215794
73
Revision A
1026911
CXXX
EXXX
DWA AUTO UP / DOWN?
NO/YES
D
C
A
Figure 5.34: DWA Auto Up/Down
7.
Press right arrow (C) to select YES. Press SELECT (D).
•
DWA AUTO UP/DOWN? appears on the upper line.
•
NO/YES appears on the lower line.
NOTE:
If YES is selected, the DWA Auto-Up function will be
activated by the GSL reel fore-aft button.
8.
Press right arrow (C) to select YES. Press SELECT (D).
9.
Press PROGRAM (A) to exit programming mode or press
SELECT (D) to proceed to the next windrower setup option.
5.3.9
Activating Hydraulic Center-Link
1011760
CXXX
EXXX
WINDROWER SETUP?
NO/YES
A
B
C
Figure 5.35: CDM Programming Buttons
1.
Turn the ignition key to RUN, or start the engine.
2.
Press PROGRAM (A) and SELECT (C) on the cab display
module (CDM) to enter programming mode.
•
WINDROWER SETUP? appears on the upper line.
•
NO/YES appears on the lower line.
3.
Press right arrow (B) to select YES. Press SELECT (C).
•
SET KNIFE SPEED? is displayed on the upper line.
1011792
CXXX
EXXX
TILT CYL INSTALLED?
NO/YES
C
B
A
Figure 5.36: Hydraulic Center-Link
4.
Press SELECT (C) until TILT CYL INSTALLED? appears on the
upper line.
•
NO/YES appears on the lower line.
5.
Press right arrow (B) to select YES. Press SELECT (C).
6.
Press PROGRAM (A) to exit programming mode or press
SELECT (C) to proceed to next WINDROWER SETUP action.
