81
47LLC OPERATING MANUAL EM-9505-B Rev.4
9. PARAMETER CONFIGURATION
■
MODE
Parameters can be grouped in several modes.
The 47LLC has modes as shown in the following table.
MODE
FUNCTION
MEASUREMENT
Measuring
Normal measurement state where the unit takes in input and provides alarms.
Present value, MAX and MIN values, alarm setpoints can be indicated in Measuring
Mode. Also the tare adjustment can be executed in this mode. When the power is
supplied, the unit operates in Measuring Mode.
Measuring
Scaling Setting
Basic settings such like excitation voltage, input scaling, display scaling and tare
adjustment, and also Teach Calibration, analog output function and analog output
adjustments can be performed.
Measuring stopped
Alarm Setting
Alarm setpoints, trip action, deadband and ON delay time can be set.
Advanced Setting
Moving average, low-end cutout and brightness can be set. Also the firmware version
can be confirmed.
Lockout Setting
Settings to prevent inadvertent button operation can be performed. Mode transition
and set values can be locked.
Loop Test Output
Simulated measured value can be set to perform output test.