34
47LLC OPERATING MANUAL EM-9505-B Rev.4
3
Press Alarm/
↓
or Scale/
↑
button to go to the excitation voltage
setting.
•
The excitation voltage is indicated.
•
‘Fnc’ indicator turns on.
NOTE
Skip to Step 7 if the default value is acceptable.
4
Press Shift button to shift the display into the setting standby
mode.
•
The indication ‘2.5V’ starts blinking, to which you can apply
changes.
5
Press Up button to select the excitation voltage.
•
Select ‘5.0V’ (excitation voltage 5 V).
6
Press Alarm/
↓
or Scale/
↑
button to apply the new setting.
•
And the next parameter setting is indicated.
NOTE
•
Press Alarm/
↓
button, and the input scaling value A will be indicated.
•
Press Scale/
↑
button, and the input type will be indicated.
7
■
TO GO ON TO SET THE INPUT SCALING VALUE A WITH PARAMETER,
Skip to Step 3 in “5.1 STEP 1. INPUT SCALING VALUE A”.
■
TO GO ON TO SET THE INPUT SCALING VALUE A WITH ACTUAL LOAD,
Skip to Step 3 in “6.1 STEP 1. INPUT SCALING VALUE A (ACTUAL LOAD)”.
■
TO qUIT,
Hold down Alarm/
↓
or Scale/
↑
button for 1 second or more to return to Measuring Mode.
Blinking
Blinking