![background image](http://html1.mh-extra.com/html/m-system/47llc/47llc_operating-manual_3126851102.webp)
102
47LLC OPERATING MANUAL EM-9505-B Rev.4
3
Press Shift button to shift the display into the setting standby
mode.
•
The second digit starts blinking, to which you can apply changes.
4
Press Shift and Up buttons to set the LL (L, H or HH) ON delay time.
•
Set within the range of 00 to 99.
5
Press Alarm/
↓
or Scale/
↑
button to apply the new setting.
•
And the next parameter setting is indicated.
NOTE
•
Press Alarm/
↓
button, and the LL (L, H or HH) coil at alarm ‘RYEN’ or ‘RYDN’ will be indicated depending on the setting.
•
Press Scale/
↑
button, and the LL (L, H or HH) deadband will be indicated within the range of 0001 to 9999 depending
on the setting.
6
■
TO GO ON TO SET ANOTHER ON DELAy TIMES,
Repeat operation from Step 2.
■
TO SET THE NExT PARAMETER,
Skip to Step 2 in “11.6 ALARM OUTPUT LOGIC (coil energized or de-energized at alarm)”.
■
TO qUIT,
Hold down Alarm/
↓
or Scale/
↑
button for 1 second or more to return to Measuring Mode.
Blinking