![background image](http://html1.mh-extra.com/html/m-system/47llc/47llc_operating-manual_3126851022.webp)
22
47LLC OPERATING MANUAL EM-9505-B Rev.4
1.6.9 INsTALLING/sEPARATING TERMINAL BLOCK
The terminal block is separable in two pieces. Tighten (loosen) uniformly two screws on both sides of the terminal block to
install (separate).
Torque: 0.6 N∙m
IMPORTANT
Be sure to turn off the power supply, input signal and power supply to the output relays before installing/separating the
terminal block.
1.6.10 ATTACHING/REMOVING TERMINAL COVER
Be sure to put the terminal cover on for safety after wiring.
■
ATTACHING TERMINAL COVER
Fit the convex part A of the meter in the concave part B of the terminal cover and push the cover until it clicks into place.
Terminal block
Terminal block screw
Terminal cover
B
A