![background image](http://html1.mh-extra.com/html/m-system/47llc/47llc_operating-manual_3126851117.webp)
117
47LLC OPERATING MANUAL EM-9505-B Rev.4
15. GOING BACK AUTOMATICALLY TO MEAsURING MODE
The display goes back automatically to Measuring Mode if the front buttons are left untouched for the specified time period
while it is in one of the setting modes. This time period is called automatic return time and can be set within the range of
1 to 99 seconds (Table 1). With the value set to ‘R 00’, the display must always be exited manually from the setting mode.
The display does not go back automatically to Measuring Mode depending on the modes (Table 2).
■
TABLE 1: AUTOMATIC RETURN TIME
DISPLAY
FUNCTION
DEFAULT VALUE
Automatic return disabled
to
1 to 99 seconds
■
TABLE 2: AUTOMATIC RETURN IN EACH MODE
MODE
OPERATION
SETTING TIME OUT
Measuring Mode
Confirming alarm setpoint
Enabled
Displaying MAX or MIN value
Disabled
Scaling Setting Mode
Enabled
Alarm Setting Mode
Enabled
Advanced Setting Mode
Enabled
Lockout Setting Mode
Enabled
Loop Test Output Mode
Disabled