121
47LLC OPERATING MANUAL EM-9505-B Rev.4
16.1 OPERATING PROCEDURE
NOTE
The following figures are display examples. The displays
depend on the settings.
1
Hold down Alarm/
↓
and Scale/
↑
buttons at once for 3 seconds
or more to move on to Advanced Setting Mode.
•
The moving average sampling No. is indicated.
•
‘Fnc’ indicator turns on.
NOTE
‘AOFF’, ‘A 2’, ‘A 4’, ‘A 8’, ‘A 16’, ‘A 32’ or ‘A 64’ is indicated depending on the setting.
2
Press Alarm/
↓
or Scale/
↑
button to go to the display refreshing
rate setting.
•
The display refreshing rate is indicated.
•
‘Fnc’ indicator turns on.
NOTE
The display refreshing rate is indicated within the range of ‘F00.0’ to ‘F99.9’ depending on the setting.
3
Press Shift button to shift the display into the setting standby
mode.
•
The third digit starts blinking, to which you can apply changes.
4
Press Shift and Up buttons to set the display refreshing rate.
•
Set within the range of ‘F00.0’ to ‘F99.9’.
1,2,
5,6
1,2,
5,6
3,4
4
Blinking