![background image](http://html1.mh-extra.com/html/m-system/47llc/47llc_operating-manual_3126851053.webp)
53
47LLC OPERATING MANUAL EM-9505-B Rev.4
3
Press Alarm/
↓
or Scale/
↑
button to go to the decimal point
position setting.
•
The decimal point position is indicated.
•
‘D/P’ indicator turns on.
NOTE
Skip to Step 7 if the default value is acceptable.
4
Press Shift button to shift the display into the setting standby
mode.
•
The indication starts blinking, to which you can apply changes.
5
Press Up button to select the decimal point position.
•
Select 1 decimal place (10
-1
).
•
Press Up button to move the decimal point.
NOTE
The right figure shows a display example. Select one among “no decimal point”, and “1 decimal place” to “4 decimal
places”.
6
Press Alarm/
↓
or Scale/
↑
button to apply the new setting.
•
And the next parameter setting is indicated.
NOTE
•
Press Alarm/
↓
button, and the input type will be indicated. Or with DC output, the analog output function mode ‘DISP’ or
‘SCLE’ will be indicated depending on the setting.
•
Press Scale/
↑
button, and the tare adjustment will be indicated.
Blinking
Blinking