![background image](http://html1.mh-extra.com/html/m-system/47llc/47llc_operating-manual_3126851110.webp)
110
47LLC OPERATING MANUAL EM-9505-B Rev.4
13.1 LOW-END CUTOUT
13.1.1 OPERATING PROCEDURE
NOTE
•
Procedures to change ‘ZOFF’ to ‘Z ON’ are described
here.
•
To change ‘Z ON’ to ‘ZOFF’, the procedures are same.
Select ‘ZOFF’ in Step 3.
1
Hold down Alarm/
↓
and Scale/
↑
buttons at once for 3 seconds
or more to move on to Advanced Setting Mode.
•
The moving average sampling No. is indicated.
•
‘Fnc’ indicator turns on.
NOTE
‘AOFF’, ‘A 2’, ‘A 4’, ‘A 8’, ‘A 16’, ‘A 32’ or ‘A 64’ is indicated depending on the setting.
2
Press Alarm/
↓
or Scale/
↑
button to go to the low-end cutout
setting.
•
‘ZOFF’ is indicated.
•
‘Fnc’ indicator turns on.
3
Press Shift or Up button to select ‘Z ON’.
1,2,
4
1,2,
4
3
3
Blinking