LSIS XGB Series, User Manual, Page: 449 / 618

XGB Analog edition manual
12.12 Configuration and Function of Internal Memory
It describes the configuration and function of internal memory
12.12.1 Data I/O area (U device)
(1) Data sent from module to XGB main unit (XGB PLC input area, read only
Device
assignment
Type
Device assignment
Comment R/W
Signal
direction
XBC IEC
_0y_ERR
BIT U0x.00.E %UX0.y.14 Module H/W error R
TC02A
→CPU
_0y_RDY
BIT U0x.00.F %UX0.y.15 Module Ready R
_0y_CH0_ACT BIT U0x.01.0 %UX0.y.16 CH 0 running R
TC02A
→CPU
_0y_CH1_ACT BIT U0x.01.1 %UX0.y.17 CH 1 running R
_0y_CH0_BOUT BIT U0x.01.4 %UX0.y.20
CH 0 disconnection
R
_0y_CH1_BOUT BIT U0x.01.5 %UX0.y.21
CH 1 disconnection
R
_0y_CH0_TEMP WORD U0x.04 %UW0.y.4
CH 0 temp. conversion value
R
TC02A
→CPU
_0y_CH1_TEMP WORD U0x.05 %UW0.y.5
CH 1 temp. conversion value
R
- In the device allocation, the small letter ‘y’ is the No. of the slot where the module is installed.
- For example, to read the ‘CH0 Temperature Value’ of the TC module installed in the slot 9, write in
U09.05. (%UW0.9.4 for IEC types)
Device Type
U 0 9 . 0 4
Slot No.
Word
[XBC t ype]
Word classifier
Device Type
Slot No.
Base No
Word
[IEC type ]
% U W 0 . 9 . 4
.
12 - 24