LSIS XGB Series, User Manual, Page: 323 / 618

Chapter 9 Analog Output Option Board (XBO-DA02A)
9.2.2 Performance specifications
Here describes performance specification of analog output module.
Item Specification
No. of channels 2 channels
Analog
output
range
Type Voltage Current
Range
DC 0 ~ 10V
(Load resistance: 2
㏀
Min.)
DC 4 ~ 20
㎃
DC 0 ~ 20
㎃
(Load resistance: 450
Ω Max.)
Output range can be set at user program or I/O parameter for each
channel
Digital
input
Type 12-bit binary data
Range
Unsigned
value
0~4000
Signed value -2000 ~ 2000
Precise value 0 ~ 1000 (DC0~10V)
400 ~ 2000 (DC4~20
㎃
)
0 ~ 2000 (DC0~20
㎃
)
Percentile value 0 ~ 1000
Maximum resolution
1/4000 (DC 4 ~ 20
㎃
: 1/3200)
2.5
㎷
(DC 0 ~ 10V)
5
㎂
(DC 0~20
㎃
)
6.25
㎂
(DC 4~20
㎃
)
Accuracy ±1.0% or less
Maximum conversion speed 1
㎳
/c scan time
Additional function
Channel output state setting (former, min, middle, max value)
Gain adjustment function
Insulation method
no insulation between analog output channels
no insulation between output terminal and PLC main unit
I/O terminal 5-point terminal block
Power supply Internal 5V
I/O points occupied Fixed type: 64 points
Supply power Internal DC5V
Current consumption 150
㎃
Weight 20g
Note1) In order to use analog output option board, the following version is needed.
Main unit Version information
XBC E type V1.1 or above
XBC S type V1.1 or above
XBC SU type V1.0 or above
XEC E type V1.0 or above
XEC SU type V1.0 or above
XG5000 V.3.61 or above
Note2)
Offset/gain value on analog I/O range can be adjusted at XG5000 - I/O parameter
9 - 3