LSIS XGB Series, User Manual, Page: 330 / 618

XGB Analog edition manual
9.7 Wiring
9.7.1 Precautions for wiring
(1) Don’t let AC power line at close range to output option board to prevent a surge or inductive
noise from the A.C. side.
(2) Select the cable with consideration of an ambient temperature and a permitted current limit. It is
recommended over AWG22 (0.3
㎟
).
(3) Don’t let the cable at close range to hot devices or materials. And don’t bring it into contact with
oil for a long time. These are the factors of a short circuit occurs unusual operation or damages
devices.
(4) Check the polarity before external power is supplied to the terminal.
(5) It may produce inductive hindrance that is a cause of unusual operations or defects if you wire
the cable with a high-voltage line or a power line.
(6) Enable the only channel you want to use
9.7.2 Wiring example
(3) Terminal block configuration
(1) Current output
(2) Voltage output
V0+
I0+
V1+
I1+
COM
XBO-DA02A
CH0
CH1
510
Ω
or
less
Motor etc.
Motor etc.
2k
Ω
or
above
450 Ω or
less
9 - 10