Lenze EVS 9300 series, System Manual

Page: 31 / 504

Technical data
3.2 General data/operating conditions
3-3
L
EDSVS9332S-B EN 3.0
Open loop and closed loop control
Switching frequency
8 ... 16 Nm
Digital setpoint selection Accuracy ±0.005 Hz (=
±
100 ppm)
Analog setpoint selection
Linearity ±0.15 % Signal level: 5 V or 10 V
Analog setpoint selection
Temperature
sensitivity
±0.1 % 0 ... 50 Nm
Offset ±0 %
Analog inputs/analog outputs • 2 inputs (bipolar)
• 2 outputs (bipolar)
Digital inputs/digital outputs
• 5 inputs (freely assignable)
• 1 input for controller inhibit
• 4 outputs (freely assignable)
• 1 incremental encoder input (500 kHz, TTL level); Design: 9-pole Sub-D socket
• 1 resolver input; Design: 9-pole Sub-D socket
• 1 master frequency input (500 kHz, TTL level); Design: 9-pole Sub-D socket; Can be optionally used as
incremental encoder input (500 kHz, TTL level)
• 1 master frequency output (500 kHz, TTL level); Design: 9-pole Sub-D socket
Cycle times
Digital inputs 1 ms
Cycle times
Digital outputs 1 ms
Analog inputs 1 ms
Analog outputs 1 ms (smoothing time:
τ
= 10 ms)