Lenze EVS 9300 series, System Manual

Page: 237 / 504

Function library
Function blocks
9.2.28 Digital frequency processing (DFSET)
9-111
L
EDSVS9332S-D11 EN 3.0
Function
z Setpoint conditioning with stretch and gearbox factor
z Processing of correction values
z Synchronising to zero track or touch probe (for resolver feedback touch probe only)
z Suppressing fault signals when synchronising via touch probe
9.2.28.1 Setpoint conditioning with stretching and gearbox factor
Stretching factor
Defines the ratio between the drive and the setpoint.
z
The stretching factor evaluates the setpoint at DFSET-IN. DFSET-POUT outputs the result.
z The stretching factor results from numerator and denominator.
– Numerator is variable from analog signal source or fixed value by the code.
– Input of the denominator under C0533.
z Relationship:
DFSET–POUT
=
DFSET–IN
⋅
DFSET–VP–DIV
C0533
Gearbox factor
Defines the transmission ratio of the drive. Enter the ratio of the drive.
z The gearbox factor evaluates the setpoint at DFSET-IN multiplied by the stretching factor.
DFSET-NOUT outputs the result.
z The gearbox factor results from numerator and denominator.
– Numerator is variable from analog signal source or fixed value by the code.
– Input of the denominator under C0033.
z Relationship:
DFSET–NOUT
=
Reckfaktor
⋅
DFSET–RAT–DIV
C0033
DFSET–NOUT
=
DFSET–IN
⋅
DFSET–VP–DIV
C0533
⋅
DFSET–RAT–DIV
C0033