Lenze EVS 9300 series, System Manual

Page: 326 / 504

Function library
Function blocks
9.2.60 S-shape ramp function generator (SRFG)
9-200
L
EDSVS9332S-D11 EN 3.0
9.2.60 S-shape ramp function generator (SRFG)
Purpose
The function block serves to evaluate a setpoint via an S shape (sin
2
shape).
C1040
C1041
C1045/1
SRFG1
SRFG1-OUT
SRFG1-IN
C1045/2
1
0
SRFG1-SET
C1046
SRFG1-LOAD
C1042
C1043
C1044
SRFG1-DIFF
Fig. 9-156 S-shape ramp function generator (SRFG1)
Signal Source Note
Name Type DIS DIS format CFG List
SRFG1-IN O C1045/1 dec [%] C1042 1 Input
SRFG1-SET O C1045/2 dec [%] C1043 1 Starting value for the ramp function generator,
acceptance when SRFG1-LOAD = High
SRFG1-LOAD d C1046 bin C0144 2 HIGH = accepts the value at SRFG1-SET and outputs it
at SRFG1-OUT; SRFG1-DIFF remains on 0 %
SRFG1-OUT O - - - - Output is limited to
±
100 %
SRFG1-DIFF O - - - - Output is limited to
±
100 %, outputs the acceleration of
the ramp function generator
SRFG1-LOAD
z Via the digital input SRFG1-LOAD the ramp function generator is loaded with the signal of
SRFG1-SET (set).
z This value is accepted immediately , i.e. no acceleration or deceleration via an S shape takes
place (the output jumps to this value).
z As long as SRFG-LOAD = HIGH, the ramp function generator remains inhibited.