Lenze EVS 9300 series, System Manual

Page: 386 / 504

Function library
Code table
9-260
l
EDSVS9332S-D12 EN 3.0
Code Important Possible settings
No. Selection Lenze LCD
C0122 OH4 LIMIT 85 45 {1 °C} 85 Temperature for OH4
Warning threshold - heatsink temperature
C0125 BAUD RATE 0 0
1
2
3
4 9600 baud
4800 baud
2400 baud
1200 baud
19200 baud LECOM baud rate
LECOM baud rate for 2102 module
C0126 MONIT CE0 3 0
2
3 TRIP
Warning
Off Conf. CE0
Configuration of communication error
monitoring with automation interface CE0
C0130 ACT TI  NSET act. Ti times
active T
i
times of NSET
C0134 RFG CHARAC 0 0
1 linear
S-shaped
NSET RFG characteristic
Ramp characteristic for main setpoint
C0135 CONTROL WORD 0 0 {1} 65535 Control word
Controller control word for LECOM-A/B/LI or
operating module.
C0136

1 CTRLWORD C135 Control word C135
2 CTRLWORD CAN Control word CAN
3 CTRLWORD AIF
Control word AIF
C0141 FCODE (SETPOINT) 0.0 -199.9 {0.1 } 199.9
Main setpoint
C0142 START OPTIONS 1 0
1 Start lock
Auto start
Start option
Start conditions are executed:
after mains connection
after message (t > 0.5s)
after TRIP
C0150 STATUS WORD

0 {1} 65535
Status word
when networked with automation
interfaces
Binary interpretation indicates the bit states
C0151 FDO (DW)  Display (hex.) of the free digital output signals
configured with C0116
Binary interpretation indicates the bit states
C0155 STATUS WORD 2

Bit00 Fail Bit08 R/L Status word 2
Bit01 Mmax Bit09 –
Extended decimal status word
Binar interpretation indicates the bit states
Bit02 Imax Bit10 –
Binary interpretation indicates the bit states
Bit03 IMP Bit11 –
Bit04 RDY Bit12 –
Bit05 CINH Bit13 –
Bit06 TRIP Bit14 –
Bit07 Init Bit15 –
[C0156]
→
Selection list 2 Configuration of the free bits of the status word
1 STAT.B0 2000 DCTRL-PAR*1-O
g
2 STAT.B2 5002 MCTRL-IMAX
3 STAT.B3 5003 MCTRL-MMAX
4 STAT.B4 5050 NSET-RFG I=O
5 STAT.B5 10650 CMP1-OUT
6 STAT.B14 505 DCTRL-CW/CCW
7 STAT.B15 500 DCTRL-RDY
C0157 (C0156)

0 1
C0161 ACT TRIP

All fault indications
Error message TRIP
Momentary fault indication (as under C0168/1)
C0167 RESET FAILMEM 0 0
1 No reset
Reset History buffer reset
Clears the history buffer