Lenovo ThinkServer TS430 Hardware Maintenance Manual Download Page 45

Page: 45 / 264

Figure 16. 2.5-inch hot-swap hard-disk-drive status LEDs

Hard-disk-drive activity LED

Hard-disk-drive RAID status LED

Description

Off

The hard disk drive has failed or is
not present.

On, green

Off

The hard disk drive is present but not
in use.

Blinking, green

Off

The hard disk drive is active and data
is being transferred.

On, green

Blinking rapidly (about four flashes
per second), amber

The RAID controller is identifying the
hard disk drive.

On, green

On, amber

The RAID array has failed and cannot
recover. You need to recreate a new
array.

Blinking, green

Blinking slowly (about one flash per
second), amber

The hard disk drive is being rebuilt.

RAID card

This topic provides information to help you locate the connectors on a RAID card if you have one installed in
the PCI-E slot 3 on the system board. See “System board components” on page 45.

Chapter 3

Product overview

Summary of Contents for ThinkServer TS430









































































































































































































































































Search results

Summary of Contents for ThinkServer TS430

Reviews:

Related manuals for ThinkServer TS430

Brands by name

Popular brands

Lenovo ThinkServer TS430, Hardware Maintenance Manual

Search results

Summary of Contents for ThinkServer TS430

Reviews:

Related manuals for ThinkServer TS430

Brands by name

Popular brands