Lenovo ThinkServer TS430 Hardware Maintenance Manual Download Page 180

Page: 180 / 264

6. Touch only the edges of the microprocessor and carefully lift it straight up and out of the microprocessor

socket. Place the old microprocessor on a static-protective surface.

Note:

Do not touch the gold contacts on the bottom of the microprocessor.

Figure 101. Removing the microprocessor

7. Make sure that the small handle and the microprocessor retainer are in the fully open position.

Note:

Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must

be kept as clean as possible.

8. Touch the static-protective package that contains the new microprocessor to any unpainted surface on

the outside of the server. Then, remove the new microprocessor from the package.

9. Remove the new microprocessor from the protective cover that protects the gold contacts on the

bottom of the new microprocessor.

Note:

Do not touch the pins on the microprocessor socket and the gold contacts on the bottom of the

new microprocessor.

Figure 102. Do not touch the pins

168

ThinkServer TS430 Hardware Maintenance Manual

Summary of Contents for ThinkServer TS430









































































































































































































































































Search results

Summary of Contents for ThinkServer TS430

Reviews:

Related manuals for ThinkServer TS430

Brands by name

Popular brands

Lenovo ThinkServer TS430, Hardware Maintenance Manual

Search results

Summary of Contents for ThinkServer TS430

Reviews:

Related manuals for ThinkServer TS430

Brands by name

Popular brands