Lenovo ThinkServer TS430 Hardware Maintenance Manual Download Page 143

Page: 143 / 264

4. Pull the handle and carefully slide the hot-swap hard disk drive or the dummy tray out of the front of

the chassis.

Figure 68. Removing the hot-swap hard disk drive or the dummy tray

5. Touch the static-protective package that contains the new hot-swap hard disk drive to any unpainted

surface on the outside of the server. Then, take the new hot-swap hard disk drive out of the package.

Note:

Do not touch the circuit board on the hard disk drive.

Chapter 6

Installing, removing, or replacing hardware

131

Summary of Contents for ThinkServer TS430









































































































































































































































































Search results

Summary of Contents for ThinkServer TS430

Reviews:

Related manuals for ThinkServer TS430

Brands by name

Popular brands

Lenovo ThinkServer TS430, Hardware Maintenance Manual

Search results

Summary of Contents for ThinkServer TS430

Reviews:

Related manuals for ThinkServer TS430

Brands by name

Popular brands