Lenovo ThinkServer TS430, Hardware Maintenance Manual

Page: 85 / 264

This menu displays a series of choices and prompts to collect information required for operating system
installation, prepares the hard disk drive for installation, and then initiates the installation process using
your operating system installation disc.
• Download drivers
This menu helps you download the required device drivers from the ThinkServer EasyStartup DVD to a
removable storage device so that you can easily get the drivers for server configuration when you need
them.
Note: The most up-to-date device drivers for various server models are always available for download on
the Lenovo Support Web site at:
http://www.lenovo.com/drivers
• About
This menu provides the version information and legal notices.
Configuring RAID
This topic provides information about RAID and the utility programs that are available for you to configure
RAID.
This topic contains the following items:
• “About RAID” on page 73
• “RAID for your server” on page 74
• “Configuring RAID using the ThinkServer EasyStartup program” on page 75
• “Configuring the onboard SATA software RAID” on page 76
• “Configuring the advanced SATA or SAS hardware RAID” on page 81
About RAID
RAID, an acronym for Redundant Array of Independent Disks, is a technology that provides increased
storage functions and reliability through redundancy. This is achieved by combining multiple hard disk drives
into a logical unit, where data is distributed across the drives in one of several ways called RAID levels.
When a group of independent physical hard disk drives are set up to use RAID technology, they are in a
RAID array. This array distributes data across multiple hard disk drives, but the array appears to the host
server as one single storage unit. Creating and using RAID arrays provides high performance, such as the
expedited I/O performance, because several drives can be accessed simultaneously.
RAID drive groups also improve data storage reliability and fault tolerance compared to single-drive storage
systems. Data loss resulting from a drive failure can be prevented by reconstructing missing data from the
remaining drives.
The following list describes some of the most commonly used RAID levels:
• RAID 0 : block-level striping without parity or mirroring
Simple stripe sets are normally referred to as RAID 0. RAID 0 uses striping to provide high data
throughput, especially for large files in an environment that does not require fault tolerance. RAID 0 has no
redundancy and it provides improved performance and additional storage without fault tolerance. Any
drive failure destroys the array and the likelihood of failure increases with more drives in the array. RAID
0 does not implement error checking, so any error is uncorrectable. More drives in the array means
higher bandwidth, but greater risk of data loss.
RAID 0 requires a minimum number of two hard disk drives.
Chapter 5
.
Configuring the server
73