Lenovo ThinkServer TS430, Hardware Maintenance Manual

Page: 34 / 264

5 Expansion card area
You server has four expansion slots on the system board for you to install appropriate Peripheral Component
Interconnect (PCI) cards. For detailed information, see “System board components” on page 45.
Note: If a ThinkServer Host Bus Adapter (HBA) is available, refer to its user guide for detailed information.
The user guide is available for download at:
http://www.lenovo.com/UserManuals
Physical link width Negotiable link width Supported card length and height
x8 x4, x2, x1 Low-profile card
6 7 Ethernet connectors
Used to attach an Ethernet cable for a LAN. Each Ethernet connector has two status LEDs to help you
identify the Ethernet connectivity, activity, and connection speed.
Notes:
• The Ethernet connector 2 (callout 7 ) marked with “MGMT” is for system management. If you want to use
remote management functions, you need to connect an Ethernet cable to the Ethernet connector 2.
• The Ethernet connector 2 (callout 7 ) marked with “MGMT” does not support the Link Aggregation
Control Protocol (LACP) teaming including NIC failover capabilities. If the teaming function is enabled,
the TMM management capability will be disabled.
Note :
Ethernet status LED Color Status Description
Green On The server is connected to a LAN.
None Off The server is disconnected from a LAN.
1
Left
Green
Blinking The LAN is connected and active.
Amber On The connection speed is 1000 Mbps
(megabits per second).
Green On The connection speed is 100 Mbps.
2
Right
None
Off
The connection speed is 10 Mbps.
8 Front door key
Used to open or lock the front door.
Note: Carefully save the front door key to avoid loss.
Server locks
Locking the server cover helps prevent unauthorized access to the inside of your server and locking the front
door helps prevent unauthorized access to the installed hard disk drives.
22
ThinkServer TS430 Hardware Maintenance Manual