Lenovo ThinkServer TS430 Hardware Maintenance Manual Download Page 39

Page: 39 / 264

Note:

The Intelligent Diagnostics Module

is only available in some models and the IDM panel also

varies by model. See “Intelligent Diagnostics Module” on page 18.

• There is a 3.5-inch hot-swap hard disk drive or a dummy hard-disk-drive tray installed in each

hard-disk-drive bay (

Note:

The number of the installed hard disk drives varies by model. For the vacant drive bay, there is a

dummy hard-disk-drive tray to cover the place.

• For information about the supported expansion card, see “System board components” on page 45.

• Depending on the model, your server might come with a screw-secured, non-hot-swap power supply

assembly or one or two hot-swap redundant power supplies.

• For more information about the memory modules, see “Memory module installation rules” on page 94.

Chapter 3

Product overview

Summary of Contents for ThinkServer TS430









































































































































































































































































Search results

Summary of Contents for ThinkServer TS430

Reviews:

Related manuals for ThinkServer TS430

Brands by name

Popular brands

Lenovo ThinkServer TS430, Hardware Maintenance Manual

Search results

Summary of Contents for ThinkServer TS430

Reviews:

Related manuals for ThinkServer TS430

Brands by name

Popular brands