Lenovo ThinkServer TS430 Hardware Maintenance Manual Download Page 53

Page: 53 / 264

Connecting cables for models with up to eight 2.5-inch SAS hot-swap hard disk drives and one
backplane

For models with up to eight 2.5-inch SAS hot-swap hard disk drives and one backplane, a RAID card
must be installed in the server.

The following cables, which come with the RAID card, are required:

• One or two 700 mm (27.56 inches) mini-SAS to mini-SAS signal cables depending on the number

of hard disk drives installed

• One 2-pin 200 mm (7.87 inches) RAID card to system board hard-disk-drive LED cable

Note:

The option package for the RAID card is designed for different types of servers and might contain

additional cables that are not required for installation.

Chapter 3

Product overview

Summary of Contents for ThinkServer TS430









































































































































































































































































Search results

Summary of Contents for ThinkServer TS430

Reviews:

Related manuals for ThinkServer TS430

Brands by name

Popular brands

Lenovo ThinkServer TS430, Hardware Maintenance Manual

Search results

Summary of Contents for ThinkServer TS430

Reviews:

Related manuals for ThinkServer TS430

Brands by name

Popular brands