Lenovo ThinkServer TS430 Hardware Maintenance Manual Download Page 163

Page: 163 / 264

1. Locate the failing hot-swap redundant power supply on the rear of your server. Then, press the release

tab

in the direction as shown and carefully pull the handle

at the same time to slide the redundant

power supply out of the chassis.

Note:

Do not use too much strength. You can first carefully slide the redundant power supply a little bit

out to release it from the secured position. Then, completely slide it out of the chassis.

Figure 88. Removing a hot-swap redundant power supply

2. Touch the static-protective package that contains the new hot-swap redundant power supply to any

unpainted surface on the outside of the server. Then, remove the new hot-swap redundant power
supply from the package.

Chapter 6

Installing, removing, or replacing hardware

151

Summary of Contents for ThinkServer TS430









































































































































































































































































Search results

Summary of Contents for ThinkServer TS430

Reviews:

Related manuals for ThinkServer TS430

Brands by name

Popular brands

Lenovo ThinkServer TS430, Hardware Maintenance Manual

Search results

Summary of Contents for ThinkServer TS430

Reviews:

Related manuals for ThinkServer TS430

Brands by name

Popular brands